.jpg&w=3840&q=75)
Bundled Scrap
Clean new steel scrap bundled to mill specification
Certification Requirements
Required certifications, standards compliance, and verification protocols.
- Bundling Operation Qms
- Compression Equipment Maintenance
- Quality Control
- Environmental Compliance
- Waste Segregation
- UKAS accredited laboratory
- ILAC accredited laboratory
- Bundling Press/Compressor Equipment Certification
- Safety Inspection
£2–5 million general liability
Rejection Criteria
Conditions and thresholds that trigger immediate rejection or downgrading.
>0.10%
Full rejection
- Copper >0.10% Affects Eaf Steel Quality
- Affects Ductility
Fe <90.0%
Full rejection
- Isri 203 Spec Violation
- Indicates Mixed Source Or Wrong Material
>0.05%
Full rejection
Stainless contamination degrades steel properties
>2.0% combined
Full rejection or credit
Non-ferrous exceeds bundled scrap tolerance
Broken strapping, damaged bundles, deterioration
Full rejection or re-bundling at supplier cost
Bundle must reach mill in intact condition for safe handling
>1% surface oil/grease
Cleaning or credit adjustment
Excess oil contaminates furnace
Any visible paint or heavy coating
Full rejection
Coatings violate clean new scrap definition
Evidence of collection/demolition material (not new scrap)
Full rejection
- Bundled Grade Requires Clean New Scrap
- Mixed Material Wrong Grade
Any detectable
- Immediate Rejection
- Radioactive Waste Protocol
Any visible
- Full Rejection
- Hazardous Waste Protocol
Any detectable
- Full Rejection
- Hazmat Disposal