.jpg&w=3840&q=75)
Non-Ferrous Copper
Copper Pipe Fittings
Grade: Mixed Brass/CopperHigh Tier
Brass and copper pipe fittings and components from plumbing systems
Market Price EstimateUpdated Daily
$2,450/ MT
+120 (5.1%)vs yesterday
Verified specifications & market data
Certification Requirements
Required certifications, standards compliance, and verification protocols.
ISO 9001:2015 Quality Management System
Scope
Fitting collection, assessment, composition verification, lead compliance protocols
Requirement
- Supplier Must Maintain Active Iso 9001 Certification Throughout Contract Term
- Plumbing Component Expertise Documented
Certification BodyAccredited third-party audit body with brass/copper specialization
RenewalAnnual audit required; copper/brass expertise verified; lead-free compliance confirmed
Certificate of Analysis
Content
- Copper content: 50-95% by weight DOCUMENTED (brass to near-pure copper range)
- Zinc content: 5-40% confirmed (brass alloy component; varies by fitting type)
- Tin content: <0.5% verified (solder residue; acceptable post-cleaning)
- Lead content: <0.05% DOCUMENTED (CRITICAL - potable water compliance; strict threshold)
- Iron: <1% quantified (ferrous contamination control)
- Other contaminants: <1% total (composition cleanliness)
- Material identity: COPPER/BRASS FITTINGS CONFIRMED (plumbing components; not mixed metal waste)
- Lead-free certification: EXPLICIT (potable water safety standard MET)
- Fitting type breakdown: percentages by type/size (elbows, tees, couplings, valves documented)
- Source: Plumbing system demolition/HVAC removal CONFIRMED
Lead-Free Certification
Explicit Requirement
- Must State Explicitly: 'Lead <0.05% Verified (Potable Water Fitting Standard Confirmed)
- Lead-Free Compliance Certified
- Regulatory Requirement Met
- Plumbing Safety Standard Established
- Material Safe For Water Application'
Fitting Type & Composition Verification
Content
- Fitting types identified (elbows %, tees %, couplings %, valves %, adapters %, other %)
- Copper/brass percentage by type (fitting type variation documented)
- Size distribution (small, medium, large breakdown typical)
- Joint type assessment (solder, threaded, sweat joint distribution)
Explicit Requirement
- Must State Explicitly: 'Copper/Brass Fitting Types Identified [Elbows, Tees, Couplings, Valves, Adapters - Specific Breakdown]
- Copper 50-95% Verified
- Zinc 5-40% Confirmed
- Brass/Copper Alloy Composition Established
- Plumbing Fitting Authenticity Verified
- Mixed Composition Acceptable'
XRF Elemental Analysis
Explicit Requirement
MUST state:
- XRF elemental profile complete
- Cu 50-95% confirmed
- Zn 5-40% confirmed
- Pb <0.05% verified (lead-free compliance)
- Sn <0.5%, Fe <1% documented
- plumbing fitting specification MET
Plumbing Source & Building Material Documentation
Explicit Requirement
MUST state:
- Copper/brass fitting source: plumbing system demolition [location/facility name] OR HVAC removal OR building decommissioning CONFIRMED
- building material origin DOCUMENTED
- material traceability ESTABLISHED
- plumbing component authenticity VERIFIED
Contamination Assessment
Explicit Requirement
MUST state:
- Solder residue acceptable and quantified <0.5%
- flux residue <1% documented
- ferrous contamination <1% controlled
- plastic components absent CONFIRMED
- plumbing material purity ESTABLISHED
Insurance Certificate
Minimum Coverage
- Brass/Copper Commodity
- Standard Non-Precious Metal
- Moderate Risk Profile
- Lead Compliance Insurance
- Lead Compliance Coverage
- Potable Water Safety Insurance
- Plumbing Standard Regulatory Compliance
Rejection Criteria
Conditions and thresholds that trigger immediate rejection or downgrading.
Lead contamination excessive
Threshold
Pb >0.05%
Action
- Immediate Full Rejection
- Regulatory Violation
Reason
- Critical Safety: Lead Exceeds Potable Water Fitting Standard
- Occupational/Environmental Hazmat Risk
- Regulatory Non-Compliance Catastrophic
Test Method
- Xrf Or Icp-Aes Verification
- Lead Quantification Ppm-Level
Severity
ABSOLUTE CRITICAL - SAFETY/REGULATORY VIOLATION
Consequence:
- Full Rejection
- Material Unsuitable For Plumbing Recycling
- Regulatory Investigation Possible
- Liability Exposure Extreme
Not copper/brass fittings or non-fitting plumbing waste
Threshold
Material identified as non-fitting OR no fitting characteristics OR mixed waste
Action
FULL REJECTION
Reason
- Material Specification Violated
- Wrong Waste Stream
- Plumbing Fixture Specification Failure
Test Method
- Visual Authentication
- Material Analysis
- Fitting Specification Verification
Severity
CRITICAL - MATERIAL IDENTITY VIOLATION
Consequence:
- Full Rejection
- Material Unsuitable For Brass Foundry Processing
Ferrous contamination excessive
Threshold
Fe >1% OR ferrous material mixed with non-ferrous fittings
Action
FULL REJECTION or mandatory magnetic separation
Reason
- Non-Ferrous Stream Contamination
- Foundry Specification Violated
- Processing Difficulty Extreme
Test Method
- Magnetic Testing
- Xrf Verification
- Ferrous Quantification
Severity
CRITICAL - CONTAMINATION VIOLATION
Consequence:
- Full Rejection Or Mandatory Magnetic Separation
- Material Unsuitable For Standard Processing
Plastic or non-metal components attached
Threshold
Plastic bodies, insulation, or non-metal materials >5% by weight
Action
FULL REJECTION or component separation required
Reason
- Non-Ferrous Metal Specification Violated
- Processing Protocol Failure
- Contamination Concern
Test Method
- Visual Assessment
- Material Analysis
Severity
CRITICAL - MATERIAL SPECIFICATION
Consequence:
- Full Rejection Or Mandatory Sorting
- Material Unsuitable For Metal Recycling Without Processing
Copper content insufficient
Threshold
Cu <50%
Action
FULL REJECTION or reclassification
Reason
- Below Minimum Fitting Specification
- Material Outside Brass/Copper Range
Test Method
- Xrf Verification
- Copper Quantification
Severity
CRITICAL - SPECIFICATION VIOLATION
Consequence:
- Full Rejection Or Reclassification To Lower Grade
- Material Unsuitable For Standard Plumbing Recycling
Severe corrosion or structural damage
Threshold
Structural compromise >30% OR corrosion compromises form
Action
Full rejection or downgrading
Reason
- Material Integrity Compromised
- Processing Difficulty
- Recovery Yield Degraded
Test Method
- Visual Assessment
- Structural Integrity Evaluation
Severity
CRITICAL - MATERIAL CONDITION
Consequence:
- Full Rejection Or Substantial Downgrading
- Material Processing Viability Questioned
Unknown composition or source
Threshold
Cannot confirm brass/copper or lead status; fitting source unverifiable
Action
- Full Rejection
- Material Quarantine Pending Investigation
Reason
- Material Identity Uncertain
- Lead Safety Risk Unconfirmed
- Potable Water Compliance Unverifiable
Test Method
- Material Analysis
- Lead Screening
- Fitting Authentication
Severity
CRITICAL - SAFETY/IDENTITY FAILURE
Consequence:
- Full Rejection
- Material Quarantined
- Comprehensive Testing Mandatory
- No Processing Until Authenticity Confirmed