ScrapBull
Aluminum Siding
Non-Ferrous Aluminum

Aluminum Siding

Grade: TaleMedium Tier

Painted aluminum house siding and gutters

Market Price EstimateUpdated Daily
$1,950/ MT
+85 (4.6%)vs yesterday
Verified specifications & market data

Certification Requirements

Required certifications, standards compliance, and verification protocols.

ISO 9001:2015 Quality Management System
Scope

Siding collection, assessment, hazmat screening, paint composition identification, processing coordination

Requirement

Supplier must maintain active ISO 9001 certification throughout contract term

Certification BodyAccredited third-party audit body
RenewalAnnual audit required; certification must remain current
Certificate of Analysis
Content
  • Aluminum base: 90-99% confirmed (painted siding core)
  • Paint coating: 5-15% by weight documented
  • Paint type identified: acrylic, polyester, enamel, or OTHER
  • Lead-based paint: PRESENT or ABSENT (CRITICAL - HAZMAT)
  • Lead content: quantified (if present; ppm if available)
  • Asbestos screening: NEGATIVE or RISK ASSESSMENT (if pre-1980)
  • Building era/construction period: documented (pre-1978 = lead risk)
  • Paint adherence: visual assessment (thick, thin, peeling)
  • Iron contamination: <0.5% confirmed (ferrous control)
  • Copper contamination: <0.3% confirmed (trace acceptable)
  • Paint removal method recommended: thermal, mechanical, or chemical
  • Processing recommendation: standard or hazmat protocol
  • Worker safety documentation: paint type safety data
Paint Composition & Lead Analysis Report
Requirement
  • Complete Paint Analysis
  • Lead Detection Critical If Pre-1978 Building Material
Lead Paint Assessment
Explicit Requirement

MUST state:

  • Building era/construction period: [year or era documented]. Lead paint assessment: [PRESUMED PRESENT if pre-1978 OR TESTED: Lead-free/Lead-based with ppm quantification]. Hazmat protocol: [REQUIRED or NOT REQUIRED]. Worker safety measures: [specified]
Asbestos Risk Screening
Explicit Requirement

If applicable: 'Asbestos screening: NEGATIVE or RISK PRESENT. Assessment method: [visual, lab test, or historical]. Recommendation: [safe for processing or hazmat protocol required]'

ISRI Tale Grade Certification
Explicit Requirement

MUST state:

  • Aluminum Siding
  • ISRI Tale Grade
  • Al 90-99%
  • Paint 5-15%
  • building demolition/renovation source confirmed
  • paint removal compatible
  • hazmat status assessed
Paint Removal Process Specification
Requirement
  • Documented Paint Removal Method Recommended
  • Worker Safety Protocols
  • Voc/Emission Controls Specified
Insurance Certificate
Minimum Coverage

£1-2 million (base material + ELEVATED for hazmat risk from lead/asbestos)

Rejection Criteria

Conditions and thresholds that trigger immediate rejection or downgrading.

Asbestos in coating
Threshold

Friable asbestos OR pre-1980 coating with asbestos suspected

Action
  • Immediate Full Rejection
  • Hazmat Disposal Mandatory
Reason
  • Critical Health Hazard
  • Worker Exposure Risk
  • Regulatory Violation
  • Occupational Safety Violation
Test Method

Visual inspection + expert assessment if pre-1980

Severity

CRITICAL - HEALTH/SAFETY HAZARD (ABSOLUTE)

Consequence:
  • Entire Lot Rejected
  • Hazmat Disposal Protocols Apply
  • Potential Regulatory Authority Notification
Lead-based paint hazmat requirement
Threshold

Lead-based paint detected (XRF >500 ppm OR pre-1978 presumed)

Action

Reclassification with -£100-200/MT penalty OR full rejection if disposal cost excessive

Reason
  • Hazmat Protocol Required
  • Epa Lead Rrp Rule Compliance
  • Worker Safety Concern
Test Method

Building age assessment OR XRF lead detection

Severity

CRITICAL - HAZMAT COMPLIANCE

Consequence:

Material reclassified to hazmat category with cost adjustment OR rejected

Aluminum content below minimum
Threshold

Al <90%

Action

Full rejection or reclassification

Reason
  • Material Purity Below Siding Specification
  • Ferrous Base Or Contamination
Test Method

XRF spectrometry

Severity

CRITICAL - SPECIFICATION VIOLATION

Consequence:

Full lot rejection or downgrading to lower aluminum grade

Paint coating outside tolerance
Threshold

Paint <5% OR Paint >15%

Action

Reclassification with credit/penalty OR rejection

Reason
  • Paint Level Impacts Processing Efficiency
  • Outside Specification Range
Test Method

Paint weight analysis or LOI

Severity

MODERATE-CRITICAL - SPECIFICATION

Consequence:
  • Reclassification With -£50-100/Mt Credit If Paint Excess
  • -£25-50/Mt If Insufficient
Ferrous contamination excessive
Threshold

Fe >0.5% OR visible ferrous material

Action

Full rejection or segregation

Reason

Ferrous mixing violates aluminum siding specification

Test Method

XRF spectrometry + magnetic test

Severity

CRITICAL - CONTAMINATION

Consequence:

Full or partial lot rejection

Unknown paint composition or building age
Threshold

Cannot determine paint type, age, or lead status

Action

Full rejection

Reason
  • Safety Uncertainty
  • Hazmat Status Indeterminate
  • Worker Safety Risk
Test Method

Building assessment + paint analysis

Severity

CRITICAL - IDENTIFICATION FAILURE

Consequence:
  • Material Rejected
  • Requires Extensive Testing For Re-Identification
Unknown hazmat risk
Threshold

No building date/era information available; pre-1980 possible but unconfirmed

Action

Reclassification to conservative hazmat assumption OR rejection

Reason
  • Cannot Rule Out Asbestos
  • Precautionary Approach Required
Test Method

Historical building assessment

Severity

MODERATE-CRITICAL - PRECAUTION

Consequence:
  • Material Held Or Reclassified Pending Age Confirmation
  • May Be Rejected
Cookie Notice

We use cookies to enhance your browsing experience.